bootmod33.3.1 - App Store

bootmod3 is the First and Most Widely Adopted flash tuning platform for the BMW F and G series vehicles and the new A90/A91 Toyota Supra.

Map Switching using steering wheel, Flex Fuel Tuning, Anti-Lag, Ethanol Content Checking on the RPM gauge in the dash, and more..

*** All New Map Editor!

Connect an ENET cable to your iOS device or use the bootmod3 WiFi Adapter for any programming, dashboard, datalogging and diagnostics.

bootmod3 allows end users to unleash the full performance potential of their BMW while doing so as the factory intended by programming the factory engine control unit (ECU/DME) and transmission (TCU, where applicable) over the OBD diagnostic port.

Program your car and gain 70-120hp in just 3minutes with an off the shelf tune. Switch among pump gas and race gas maps in just seconds.

CustomROM Features available for most vehicles supported:
- Map switching using steering wheel cruise control buttons, switching entire calibration tables right inside the factory DME
- Flex fuel functionality integrating a Flex Fuel Sensor
- Antilag functionality to build boost off the line or while rolling
- Live adjust screens for adjusting exhaust burble on the fly without re-flashing using a simple slider control in the app
- In-Dash Ethanol content check on the RPM gauge using cruise buttons on the steering wheel (e.g. 1500rpm = 15% ethanol, 6000rpm = 60% ethanol)

/// OTS maps
Load pre-made performance tunes for your vehicle

/// CUSTOM TUNING
Customize the performance tuning on your DME / ECU using our custom tuning interface. Tailor performance, sound, fuel economy to your specific needs. Flash the transmission with GTS software on supported models.

/// Live Monitoring
Monitor your engine behaviour using a configurable gauges layout to keep on eye on any of the hundreds of engine monitors internal to the ECU including BMW specific logging channels and RAM variables. Monitor torque limits, boost, ignition timing, variable valve timing, fuel targets, fuel trims, across all cylinders, etc.

/// Cloud Enabled
Cloud services allow for datalogs and maps to be stored in one central location and access from any location

/// FEATURES
For feature descriptions please refer to our website for each particular vehicle you're interested in tuning using the bootmod3 platform.

Supported vehicles:

Bosch MEVD17.2 DME Vehicles:
F8x M3, M4
F2x F3x 135i, 235i, 335i, 435i
F1x 535i, 640i, M5, M6, 550i, 650i, X5, X6
F87 M2, M2 Competition
F4x X4, X4M
F8x X5M, X6M

Bosch MG1 DME Vehicles:
F2x 2015 - 2019 M140i
F2x 2016 - 2019 M240i
F3x 2015 - 2018 340i
F3x 2016 - 2019 440i
G3x 2017+ 540i
GT G32 2017+ 640i
G1x F0x 2015+ 740i
G01 2017+ X3 M40i
G02 2018+ X4 M40i
G8x M3/M4
G9x X3M/X4M

2020+ A90/A91 Toyota Supra

* This racing product is for competition closed course use only.

** Use of this software may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. bootmod3 makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.

Version History - Improved datalog syncing and naming, including fixes for stock tune logs and duplicate recordings
- Fixed missing channels in Chart Viewer Group Mode and improved imports from shared datalog links
- Added Engine Speed to the default Driver Request chart group and improved cursor behavior
- Added an Original option for cold-start settings to preserve the values saved in a map
- Refined the flash progress screen with clearer status, logs, and actions
- Improved vehicle registration error messages 3.3.1 Sep 30 Race Dash
- New dashboard layout with a full-width RPM bar and a large central readout
- Compact supporting readouts keep your essential channels visible at a glance
- Customize every readout with any active channel
- Automatically fills the layout from your existing dashboard channels the first time you open it
- Monitor channel ranges, minimum and maximum values, and visual alerts
- Adapts to desktop, tablet, and mobile screens in portrait or landscape
- Switch between Race Dash, Gauges, and List while keeping your existing dashboard setup 3.3.0 Sep 11 - Added WiFi Adapter firmware v3.14.4.6
- Fixed an issue that could cause connection drops when multiple bootmod3 WiFi Adapters were nearby
- Improved connection reliability at meets, track days, and other crowded locations 3.2.4 Sep 9 - Improved Group Mode cursor values, channel tooltips, and default channel grouping
- Improved chart zooming, trackpad scrolling, and hover behavior
- Improved Y-axis labels, tooltips, and Independent mode stability 3.2.3 Sep 9 - Refined mobile layouts and controls for a cleaner charting experience
- Improved cursor values, selection statistics, zooming and scrolling
- Improved Group Mode axes and performance when adding channels
- Shared datalogs now retain their original names and durations and can be saved to the cloud
- Saved datalogs now use the flashed map name
- Prevented devices from going to sleep during live datalog recording
- Fixed Chart Viewer window controls on Windows 3.2.2 Sep 6 - Refined mobile layouts and controls for a cleaner charting experience
- Improved cursor values, selection statistics, zooming and scrolling
-Improved Group Mode axes and performance when adding channels
- Shared datalogs now retain their original names and durations and can be saved to the cloud
- Saved datalogs now use the flashed map name
- Prevented devices from going to sleep during live datalog recording 3.2.1 Sep 3 - Completely rebuilt charting for datalogs, on desktop and mobile
- Group Mode for stacking channels into separate lanes you can add, reorder, resize and pin
- Automatic and independent Y-axis scaling, deep zoom, and range selection with statistics
- Draggable cursor with per-channel readouts and a data table that follows the chart
- Math Channels for building your own calculated channels
- Compare two datalogs on a shared, time-aligned timeline
- Live Vehicle mode for watching channels stream from the car while you record
- Import and export chart templates, datalog packages and CSV files
- Your channel and layout setup is remembered per datalog 3.2.0 Aug 28 - Improved sign-in reliability for users in China
- Added the Startup Roar map configuration option for N20-PWG-L vehicles
- Fixed the Nostrum high-flow DI injector map configuration option for S63-172H vehicles 3.1.40 Aug 17 - Improved sign-in reliability for users in China
- Added the Startup Roar map configuration option for N20-PWG-L vehicles
- Fixed the Nostrum high-flow DI injector map configuration option for S63-172H vehicles 3.1.39 Aug 6 - Added B38-T0 map configuration support
- Added the Startup Roar map configuration option for N55-PWG172X vehicles
- Redesigned the flash screen 3.1.38 Aug 3 - Bug fixes and improvements 3.1.37 Jul 29 - Bug fixes and improvements 3.1.36 Jul 27 - Bug fixes and improvements 3.1.35 Jul 22 - Bug fixes and improvements 3.1.34 Jul 16 - Bug fixes and improvements 3.1.32 Jul 14 - Bug fixes and improvements 3.1.30 Jul 9 - Bug fixes and improvements 3.1.29 Jul 9 - Bug fixes and improvements 3.1.27 Jul 1 - Bug fixes and improvements 3.1.26 Jul 1 - Bug fixes and improvements 3.1.25 Jun 11 - Bug fixes and improvements 3.1.24 Jun 7 - Bug fixes and improvements 3.1.23 Jun 5 - Bug fixes and improvements 3.1.22 Jun 4 - Bug fixes and improvements 3.1.21 Jun 1 - Bug fixes and improvements 3.1.20 May 29